Description
Genuine IWS-03 spare parts — including for Caroma-era taps
The fastest way to fix a swipe sensor tap is with the right part, first time. Every component here is a genuine Sanitron part, compatible with IWS-03 taps supplied by us and with units installed while the product was sold under the Caroma Sanitron name (SKU IWS-03-SET). Same design, same dimensions, straightforward swap-over for your plumber or maintenance team.
Choose your part
Sensor Faceplate Kit — Stainless Steel. The complete wall-facing assembly: swipe sensor pre-mounted in the faceplate, ready to connect. The usual choice when a faceplate is damaged, corroded or being refreshed during a washroom upgrade. [CONFIRM whether kit includes fixing screws/gasket]
12V Electronic Rough-In Kit. The in-wall electronics package for the IWS-03. Suits new rough-ins and full rebuilds of existing in-wall units where the electronics have reached end of life. [CONFIRM exact kit contents]
Sanitron Solenoid Valve — 12V. The workhorse of the system, and the most common service item on high-use taps. If a tap won’t start, won’t stop, or drips continuously, the solenoid is the usual suspect. Direct replacement for the valve inside the IWS-03 in-wall box.
IWS-03 Remote Control. Sanitron’s remote for the IWS-03, used to adjust tap settings without opening the wall. Handy for maintenance teams managing multiple taps across a site. [CONFIRM which settings are adjustable, e.g. run-out time / sensor range]
IWS-03 Sensor Only (No Faceplate). The swipe sensor module alone, for when the existing faceplate is in good condition and only the electronics behind it need replacing. The economical fix for a tap that no longer responds to a swipe.
Not sure which part you need?
Send us a photo of your faceplate and in-wall unit along with the symptoms — won’t start, won’t stop, weak flow, no response — and we’ll confirm the right part before you order. Contact us here.
Managing multiple taps?
For hospitals, aged-care facilities and commercial sites running several IWS-03 taps, we can put together a spares package — typically a solenoid valve, sensor and faceplate kit held on site — so a single failed part never takes a washroom out of service. Ask us about volume pricing.
Fitment and installation
| Compatible with | Sanitron IWS-03 swipe sensor taps, including units sold under the Caroma Sanitron name (SKU IWS-03-SET) |
| System voltage | 12V (from mains transformer) [CONFIRM] |
| Installation | Plumbing components by a licensed plumber to AS/NZS 3500.2; electrical work by a licensed electrician where applicable |
| Origin | Genuine Sanitron parts — Brisbane, Australia |
| Warranty | [CONFIRM parts warranty period with Sanitron] |
