Description
The right reach, in brushed stainless
A wall-mounted sensor tap is only as good as its spout: too short and users wash against the basin’s back wall; too long and water splashes the front rim. That’s why these brushed stainless steel spouts come in three reaches — 150mm, 200mm and 265mm — so you can match the spout to the basin, whether it’s a compact clinic hand basin or a deep trough in a commercial washroom.
Each spout is finished in brushed stainless steel — durable, corrosion resistant and easy to keep hygienic in high-traffic washrooms — and ships with a matching cover flange for a tidy wall finish and a Neoperl 5 L/min laminar-flow insert. Laminar flow delivers a clear, coherent, splash-free stream rather than an aerated spray, which matters in healthcare settings: less splashing means less surface contamination around the basin. [CONFIRM WELS star rating to state here]
Compatibility
These spouts suit the Sanitron IWS-03 wall mounted swipe sensor tap and the IWS-04 Ecotron — including taps installed while those products were sold under the Caroma Sanitron name (SKU IWS-03-SET). If your existing spout has seen better days, replacing it is a simple like-for-like swap. [CONFIRM thread/connection spec, e.g. fitting size]
Choosing your length
- 150mm — compact basins and tight accessible layouts where wall-to-basin distance is short
- 200mm — the all-rounder for standard commercial and healthcare hand basins
- 265mm — deep basins, troughs and applications needing extra reach to the waste
Rule of thumb: aim for the stream to land at or just behind the basin’s waste outlet. Unsure? Send us a photo of your basin with its front-to-back measurement and we’ll recommend the right length.
Specifications
| Material / finish | Brushed stainless steel |
| Lengths | 150mm, 200mm, 265mm reach |
| Flow | Neoperl 5 L/min laminar-flow insert (supplied) |
| Included | Spout, matching cover flange, flow insert [CONFIRM fixings] |
| Water efficiency | WELS registered [CONFIRM star rating and registration number] |
| Compatible with | Sanitron IWS-03 and IWS-04 sensor taps, including Caroma-era units |
| Installation | By licensed plumber to AS/NZS 3500.2 |
| Origin | Supplied by Sanitron, Brisbane, Australia |
| Warranty | [CONFIRM warranty period with Sanitron] |
Pairs with
Fitting out or refreshing a whole washroom? Pair these spouts with the IWS-03 complete rough-in set, the IWS-04 Ecotron, or keep spares on hand from our IWS-03 spare parts range.
Caroma® is a registered trademark of Caroma Industries Limited (GWA Group). Handsfree Hygiene is not affiliated with, endorsed by or sponsored by Caroma or GWA Group; model references identify product compatibility only.
